K2 Ultra Cut C3+ is a mechanical polishing paste for paints. Removes very large scratches (even those from 800-grit sandpaper) and produces a perfect, glossy finish. Eliminates all defects, orange peel, streaks, oxidation, scratches, holograms, and discoloration. Saves time because, unlike many other products, it works very quickly. Suitable for polishing all types of automotive paints, industrial paints, boats, furniture, gelcoats, headlights, cellulose, synthetic surfaces, acrylics, and many more. Suitable for use with polishing sponges of different hardnesses. For minor scratches, a lightly abrasive sponge is recommended (e.g., K2 Duraflex L613, L643). For very severe imperfections, use a highly abrasive sponge (e.g., K2 Duraflex L611, L641) or a medium-abrasive sponge (e.g., K2 Duraflex L612, L642). For a perfect finish on heavily damaged surfaces, two-step use is recommended: first with a hard sponge to remove scratches, then with a soft, lightly abrasive sponge for polishing.
Directions for use: Before polishing, the surface must be dry and degreased. Large defects can be removed with sandpaper. Apply to a polishing sponge. The paste can be used dry or slightly moistened with water to improve glide. Spread the paste at low speed (approximately 600 rpm). Increase speed to approximately 1500 rpm and polish until intense gloss is achieved. After polishing, clean the surface with a microfiber cloth. Do not allow the paste to dry on plastic parts. Do not polish in direct sunlight.
Safety Information: Keep out of reach of children.
Manufacturer / Responsible Entity for Placing the Product on the EU Market: Melle Sp. z o. o., Stary Staw 9, 63-400 Ostrów Wlkp., Poland, UE, +48 62 737 88 00, www.k2.com.pl, www.k2-global.com, info@melle.com.
