K2 Color Flex 400ml - Glossy White Peelable Rubber Paint

K2 Color Flex is a revolutionary method for temporarily changing the color of your car and other components. Offers an attractive appearance and effective protection. Protects against scratches, dirt, moisture, diluted acids, corrosion, oils, and greases. Suitable for application on painted parts, steel and aluminum rims, bumpers, wood, metal, glass, plastics, and many other materials. Painted parts can be washed with a sponge and shampoo. The coating has excellent flexibility and does not crack or crumble. Resists temperatures from -30°C to over 90°C. The applied coating can be easily removed. After manual removal, K2 Color Flex leaves no residue, leaving the surface exactly as it was when applied.

Directions for use: Surfaces to be painted must be clean, dry, free of rust and grease. Shake well for approximately 3 minutes before use. Test the effect on the paint in an inconspicuous area. Apply from a distance of 20-30 cm. To achieve a perfectly smooth, streak-free surface, apply 3 to 5 very thin layers. The interval between layers should be approximately 5 minutes, depending on ambient temperature and layer thickness. In critical areas (corners, edges), the paint layer must be thick enough to avoid cracking during removal. To remove the coating, pull from the edge and then slowly tear off the rest by hand.

Note: Do not apply COLOR FLEX L343CL clear coating over COLOR FLEX colored coating (black, red, blue, etc.).

Drying times: Touch dry 10 min., full cure 2 hours.

RAL equivalent: 9003 Glossy

Safety Information: Danger. Extremely flammable aerosol. Pressurized container: May burst if heated. Causes eye irritation. May cause drowsiness or dizziness. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Do not inhale spray. Protect from sunlight. Do not expose to temperatures exceeding 50°C. Repeated exposure may cause skin dryness or cracking. Contains: ethyl acetate; acetone.

Manufacturer / Responsible Entity for Placing the Product on the EU Market: Melle Sp. z o. o., Stary Staw 9, 63-400 Ostrów Wlkp., Poland, EU, +48 62 737 88 00, www.k2.com.pl, www.k2-global.com, info@melle.com.