K2 Motor Flush 250ml - Engine Flush Solution

K2 Motor Flush is a professional engine cleaning solution with a proven formula based on cleaning agents, lubricants, and anti-wear additives. Removes carbon deposits, oil residues, and soot. Dissolves contaminants that clog piston rings, improving their sealing. Sealed rings mean increased compression and reduced oil consumption. Dissolves even the oldest carbon deposits, sludge, and other contaminants from the engine lubrication system in just a few minutes. Restores full flow to oil passages. Thanks to its refined formula and high efficiency, the engine flush removes deposits, carbon, oil residues, and soot from inside the engine, restores full capacity of oil channels, reduces smoke and environmentally harmful exhaust emissions, increases power by freeing stuck piston rings, increases cylinder compression, reduces oil consumption, and reduces engine noise, eliminating valve train noise. Can be used in all internal combustion engines – diesel, gasoline, and LPG. Special lubricating additives in the flush protect the engine from excessive friction that may result from oil dilution after adding the flush. Completely safe for the engine.

Recommended especially for: Driving with oil older than 12 months, purchasing a car with unknown engine history, mainly city driving (short distances), excessive engine oil consumption, excessive soot (black or blue exhaust smoke), low compression, oil leaks through the breather valve, exceeding the recommended oil change interval. Recommended at least once a year, ideally at every oil change. One can is sufficient for 4-6 liters of oil. For heavily contaminated engines, the flush ratio and running time can be increased.

Directions for use: The engine flush should be performed immediately before an oil change. Before applying the product, check the engine oil level. If it is not correct, top up with oil. Then, pour the entire contents of the package into the warm engine. Start the engine and let it idle for 10-15 minutes. Then, turn off the engine and drain all the old oil by gravity. Replace the oil filter with a new one. Pour the appropriate amount of new oil according to the vehicle manufacturer's recommendations.

Capacity: 250 ml.

Safety Information: Danger. Flammable liquid and vapor. Harmful in contact with skin or if inhaled. Causes skin irritation. Causes eye irritation. May cause respiratory irritation. May cause damage to organs through prolonged or repeated exposure. May be fatal if swallowed and enters airways. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. Use only outdoors or in a well-ventilated area. IF SWALLOWED: Immediately seek medical advice. DO NOT induce vomiting. IF ON SKIN: Wash with plenty of water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Dispose of contents/container in accordance with local regulations. Contains: reaction mixture of ethylbenzene and xylene.

Manufacturer / Responsible Entity for Placing the Product on the EU Market: Melle Sp. z o. o., Stary Staw 9, 63-400 Ostrów Wlkp., Poland, EU, +48 62 737 88 00, www.k2.com.pl, www.k2-global.com, info@melle.com.